Every thing you ever wanted to know about Proccing
just click here: https://www.youtube.com/playlist?list=P ... R64RkOVAHd
I hear the magic in your sighs
Just when I think I'm gonna get away
I hear those words that you always say"
~ "Abracadabra", Steve Miller Band 1982
Light thick and through
From the whites of my eyeballs
To the soles of my shoes
Blow my fuse
(Hey hey) You got nothing to lose."
~ "Blow my Fuse", Kix 1988
Let's start with a basic definition. The MorlochWiki (MW) has a pretty good one so let's use that: "A Proc is an enchantment associated with a weapon that grants it a five percent chance of discharging spell-damage, bleeding over time, poison damage over time, health drain, or stamina damage. "Proc" is short for "programmed random occurrence". In the past I've also read that PROC is an acronym for Percentage based Random Occuring Casting - In either case it hardly matters because both give you the idea of what it is. In a nutshell, a Proc is a prefix, suffix or enchantment available on a weapon that enables the random casting of a specific spell-like damage. It's as if suddenly your sword just gained the power to throw fireballs or lightning bolts at your foe. NICE ! Yep, that's bonus damage any Shadowbane slayer can appreciate. While we're here it might prove beneficial if you start by reading the whole page on MW to get the basic ideas. Take your time - i have a full cup of coffee - Come on back when you're done.
Ok, so I assume you understand that every weapon (every item really) in Shadowbane has 3 available slots: Prefix, suffix, and enchantment. There's tons of different things available for all three of these slots but we're just concerned with the Procs. Procs are available in all 3 slots. While prefix and suffix are pretty straight forward some folks get confused with the enchantment one. Basically, the enchantment slot is only used by a class (Crusader, Assassin, Nightstalker) or Discipline (Undead Hunter) that has a PROC enchantment spell. There are other castable enchantments in game such as Forgemaster and Ratcatcher but those are not procs so we won't be discussing them here although they do use the same slot as Proc enchantments. Proc that are applied to a weapon as a Prefix or suffix are permanent. Procs that applied as a casted Enchantment have a limited shelf life and expire after a set amount of time - always pay attention to this as the mouse over for the timer in game is not always 100% reliable. A good rule of thumb is most of the casted Enchantments have a duration TWICE as long as the spells recycle time (so dual wielders can just barely keep both weapons procced all the time) Now, Procs in Prefixes are are limited to Tier 1, suffixes can be Tier 1,2,3( or even 4) and enchantment procs are rated according to trains in the class / disc spell. I'm not going to give all the individual names for all the different Tier procs here in this guide you can look those up on MW. "Wait up what are Tiers? " you ask , - I know - I know more on this later. I promise.
You're poison, I don't wanna break these chains"
~ "Poison" , Alice cooper 1989
These are the different types of damage types available on procs:
These are single casted direct damge types:
Poison (class Enchantment only)
Health Drain (Vampire) ** (grant's you the damage amount as a heal)
Other types of procs:
Poison = As a suffix / prefix it applies a poison damage DoT : 30 sec duration w/ 5 sec pulses
Stamina = does not damage opponents health but rather their stamina
Bleed = does "Bleed" damage applied as a bleed damage DoT: 30 sec w/ 5 sec pulses.
Snare = does no damage but applies a 40% snare debuff . Only available baked into Vorgrim Dagger. No Tiers applied.
Maybe your mind is playing tricks
You sense, and suddenly eyes fix
On dancing shadows from behind
Fear of the dark, fear of the dark
I have constant fear
that something's always near"
~ "Fear of the Dark", Iron Maiden 1992
All of these apply their normal damage type. Thus, all the normal game mechanics concerning resists and exposes apply. They simply act as if your toon had cast them as a spell so that means that power damage buffs, debuffs, stance bonuses etc. will all apply too. One thing that does not affect them is a power block as your toon does not actually need to cast them they are baked into your weapon thus fire automatically. This also means that they use the Min and Maximum spell damage formulas to determine damage (you can find these in MW as well) so things like your INT and SPI will also play a role in damage amounts. The last important thing to note is that all procs use 0 for "focus line" in the damage formulas as they have none - even the ones that technically do like crusader and assassin.
How do they work ? well, simply put each individual proc has a 5% chance of going off each and every time you successfully hit an opponent. Let's be clear here sunshine, the KEY words in that phrase are successfully hit! That means that the comp goes through all it's normal calculations concerning ATR/DEF, passive defence etc BEFORE it worries about whether your PROC went off. ONLY AFTERyou have successfully hit does it check for a proc going off. I simply can't stress this enough, if you are not hitting your opponent you never had the chance to proc. Knowing this you must realize now that great ATR or at the very least a reliable means of dealing with an opponents defense is a must if you want to have any luck at all wielding PROCS. Now let's go back to the first sentence a minute. Each PROC has a 5% chance of firing. Now this 5% is per each individual PROC so the math here is cumulative which means it is really easy to figure out your chances of a proc going off - just take 5% * (the total number of procs you are wielding) The most any one can ever have would be 6 procs total and that's a dual wielding toon with prefix, suffix, and enchantment slots filled with procs on both weapons. So in this example this toon would have a 30% chance of any 1 of his procs going off on every good hit!NOTICE: i said any one there. That's important because if you start changing the parameters like saying "what are the odds that 2 will go off on the same attack?" or "what about all 6 ?" well then you are changing the math involved and I suggest you start reading about odds and probability because that goes way deeper than I care to go in this guide. "Can more than one PROC fire on the same attack ?" you ask. The quick answer is yes sunshine, they can. The comp checks for each PROC you have individually so that means you can have more than one fire at a time but the more PROCS you have the longer the odds are of them all going off at once. (however the more procs available would make it easier for 2 to go off) I've seen two fire on a handful of occasions and I have spent countless hours testing them on a 6 wielder (which has the best odds of 2 going off simultaneously) I have never seen 3 the odds are that small. You will likely win the lottery before you see 6 go off at once. But if you truly want to know the chances are it's: ( 5^6 / 100^6)
Oh baby don't you leave me
Stone... Cold, your leavin' me cold
Stone Cold... I thought I knew you so well
Stone Cold... Can't break away from your spell"
~ "Stone Cold", Rainbow 1982
From there you can figure out it's PROC DPS with: Average Proc amount * 7.5 / 60 = PROC damage per second. [ average proc amount will depend of toon build etc. , it's x7.5 because he will be able to expect to proc 1 time every 8 seconds thus should average 7.5 times in 60 seconds] If you already know your toons regular DPS then add that to your PROC DPS to get total DPS. This knowledge is massively important when attempting to figure out the value of a build compared to other build option.
It is vitally important to remember that when ever we talk about % based averages that there is a large degree of luck involved. Averages only work over long periods of time and your PROC success can vary widely Yes, you could possibly Proc 20 times in 30 seconds and watch you foe crumple under a massive rainbow of particle affects. It's also just as possible for you to go for 10 minutes without proccing once ! The lesson here is that time works in the proccers favor. Plan for this! Every Proccing based build (a build that depends on procs for it's primary damage source) must be build for endurance. The longer you can stay in a fight the better the chances are that your procs will win the fight for you. Even if you only plan to use procs as a supplemental source of damage it's still wise to figure out your average proc damage even if it's only to enable you to better evaluate whether or not something else might be more beneficial as a suffix to you.
Your eyes beckon me
Your lips they speak, lies and misery
I know it's wrong, but I can't turn away
The flames draw near, they're telling me to stay"
~ " Into the Fire", Dokken 1984
Well there Sweet Cheeks you've made it half way through this wall of text and I am down to half a cup of coffee. Let's dive into what is seemingly the hardest concept of procs their strengths and the Tier system. Right off the bat in order to clearly understand how the Procs are rated against each other for strength let's dive straight into some game code. Now don't you tremble there Sweet Cheeks, I'll hold your hand and talk you through it. It's not to hard and you don't need to be a computer programmer or anything. I can put this in lay mans terms.
This is a direct copy of the game code governing Procs provided to me by a previous Dev on the Emu project:
"ID" "IDString" "modType" "minMod" "maxMod" "percentMod" "ramp" "useRampAdd" "type" "string1" "string2"
"288" "PROC-LIGHTNING" "Health" "-13" "-53" "0" "0.057" "0" "Lightning" "" ""
"1280" "PROC-MENTAL" "Health" "-20" "-46" "0" "0.057" "0" "Mental" "" ""
"1374" "PROC-HOLYBLADE" "Health" "-17" "-50" "0" "0.057" "0" "Holy" "" ""
"1543" "PROC-POISON" "Health" "-4" "-7" "0" "0.057" "0" "Poison" "" ""
"2371" "PROC-HOLY" "Health" "-13" "-53" "0" "0.057" "0" "Holy" "" ""
"2791" "PROC-FIRE" "Health" "-15" "-51" "0" "0.057" "0" "Fire" "" ""
"2900" "PROC-BLEEDING" "Health" "-3" "-8" "0" "0.057" "0" "Bleed" "" ""
"2915" "PROC-UNHOLY" "Health" "-13" "-53" "0" "0.057" "0" "Unholy" "" ""
"2973" "PROC-COLD" "Health" "-13" "-53" "0" "0.057" "0" "Cold" "" ""
"3390" "PROC-POISONBLADE" "Health" "-21" "-45" "0" "0.057" "0" "Poison" "" ""
"3949" "PROC-DISEASE" "Health" "-4" "-7" "0" "0.057" "0" "Disease" "" ""
"4151" "PROC-MAGIC" "Health" "-18" "-48" "0" "0.057" "0" "Magic" "" ""
"5095" "PROC-ACID" "Health" "-3" "-8" "0" "0.057" "0" "Acid" "" ""
That's almost complete but we're missing a couple so we need one more quote from a Dev in the Forums:
So the very first blue line going across the top is the header describing the colums defined by the quotation marks running vertically below. We only need to look at a couple the rest don't matter. These are the ones we're interested in:Amaz wrote: ↑Fri Jan 10, 2014 12:17 amIndeed. Remembering that DISEASE, BLEEDING, POISON and ACID (the low ones) are 30 second DOTs with 5 second damage pulses.
Stam is :Snare is a flat 40% snare irrespective of tier of proc.
Code: Select all
4526 PROC-STAMINA Stamina -5 -12 0 0.057 0 Magic
Vampyre is 25pt drain with a 1.43 ramp and 100% efficiency.
IDSTRING = name of PROC
MODtype= this is what it affects, that's going to be health for all of them with the one exception of STAM proc
minMOD and MaxMOD= these are the min and max damage base numbers or in essence 1 train.
ramp = how the min/max damage numbers are adjusted per train (it's the same across the board so no real importance there)
type= this defines the damage type of that proc
OK, now in the horizontal rows we can discard DISEASE and ACID as they are not available as PROCS in game. The rest are pretty straight forward except for 2 and I will go a little in depth with those HOLY and POISON. Do you see that there are 2 seperate entries in that list for each of those IE: HOLYBLADE & HOLY, PoisonBlade & Poison holyblade is the class/disc enchantment proc used by Nightstalkers, Crusaders, and UndeadHunters. Poisonblade is the class proc enchantment used by Assassins. It's vital you notice that even though they have an identical damage type as their counterpart procs that they are actually different spells with different base damage numbers and in the case of poison different applications. The Assassin poisonblade proc is a one hit, direct poison damage proc similar to all the other direct damage procs. The poison (prefix/suffix) proc is applied as a 30 second DoT with 5 second pulses and much lower base damage numbers. Nest up let's discuss the Tier system.
You're the star of the masquerade
No need to look so afraid
Jump on the tiger
You can feel his heart but you know he's mean
Some light can never be seen"
~ "Holy Diver", Dio 1983
Let's quickly note here that Prefixes Procs are always limited to T1. Suffix Procs can be T1,2,3 (or 4) *** T4 suffix proc weapons were once available in game as FC items only and are no longer available. Enchantment procs use actual trains and are the only Procs available to hit R4 (sader and NS only - UH is capped at 20).Amaz wrote: ↑Fri Jan 10, 2014 9:57 pmIts quite complicated because essentially weapon procs work like normal spells, generally speaking T1 procs cast as a Rank 1 power, T2 procs cast as a Rank 11 power, T3 procs cast as a Rank 35, T4 as Rank 40. There are slight variations, but largely this is the case. A normal damage calculation is then done as if the player had cast the spell with no focus and the indicated rank of the power. See http://morloch.shadowbaneemulator.com/i ... p/Formulas for spell damage formula.
So the Tier training levels for Procs are OFFICIALLY:
T1= 1 train
T2= 11 trains
T4 = 40
Enforce a mental overload"
~ "Angry Again", Megadeth 1993
Aeroch makes a very important observation about Vampyre PROCs here in the last line. Up until now I have left it as is because this is what was directly supplied to me by Amaz, but Aeroch is correct. Vampyres base damage numbers can't be right. Now the efficiency is actually 100% that never changes and it's easily testable in game so that leaves us with base damage numbers and the ramp. Right off we know the base damage is wrong because if it were a flat rate of 25 then your toon would always proc for the exact same amount on the drain and this simply isn't the case. There must be a range. The ramp might also be in error. Every single other proc n game uses the exact same ramp why would this one be different? I am simply going to have to do some more testing and update this in the future.aeroch wrote: ↑Mon Mar 17, 2014 11:16 am
edit2: I think this works
Plugging those into the spell damage formulas on the wiki, assuming 292 Intelligence and 102 Spirit after buffs/gear,
Code: Select all
minimum damage (rank 40) = minMod+(powerRank*(minMod*ramp)) maximum damage (rank 40) = minMod+(powerRank*(minMod*ramp)) ex. Poison Blade minimum damage (rank 40) = 21+(40*(21*0.057)) = 68.88 maximum damage (rank 40) = 45+(40*(45*0.057)) = 147.6 ex. Consecrate Weapon minimum damage (rank 40) = 17+(40*(17*0.057)) = 55.76 maximum damage (rank 40) = 50+(40*(50*0.057)) = 164adjusted for Mage Assassin offensive stance (+46%)
Code: Select all
min = (0.0045*292+ 0.055*(292-0.5)^0.5+0.006*102+0.07*(102-0.5)^0.5+0.02*0)*69 = 246 max = (0.0117*292+0.13*(292-0.5)^0.5+0.0024*102+0.021*(102-0.5)^0.5+0.015*0)*`48 = 902seems about right to me
Code: Select all
min = 246*1.46 = 360 max = 902*1.46 = 1317
so overall,That's calculating for rank 35 on rollable suffixes, rank 40 for Assassin/Crusader/Nightstalker powers
Code: Select all
Type Min Max LIGHTNING 39 159 MENTAL 60 138 HOLYBLADE 56 164 POISON 12 21 HOLY 39 159 FIRE 45 153 BLEEDING 9 24 UNHOLY 39 159 COLD 39 159 POISONBLADE 69 148 MAGIC 54 144 STAMINA 15 36
Not sure how to calculate Vampyre, though. Using the above formula it's way too high. Paging Dr. Amaz
Blood on the street
Blood on the rocks
Blood in the gutter
Every last drop
You want blood
You got it"
~ "If you want blood" ACDC 1978
After finally getting the chance to test this in game i think I have some solid numbers. I tested this on a dual wielder with 2 of vampyre procs and recorded 50 proc numbers. none of these procs were kill shots as this would skew the numbers because regardless of the proc damage amount you can't drain more health than the target has in game.
Character stats: INT = 199 SPI = 70 and using focus line = 0 Assuming a 100% conversion rate And assuming a ramp modifier = 0.057 like all the others
Highest proc = 348
Running this backwards through the maximum spell damage formula we get an adjusted max damage of = 83.30585670
Running this backwards through the modifier formula in this guide we get = 27.8 base damage pre modifier.
Smallest PROC = 199
Running this backwards through the MIN spell damage formula we get an adjusted MIN damage of = 73.29947716
Running that backwards through the modifier formula we get = 24.4
Ironically that brackets perfectly what Amaz first wrote so i think it's perfectly fair to call this good.
Vampyre MIN: 24 MAX: 28
Well now we are almost to the end and it's time for a quick summary of the strengths of the Procs:
Rated by max damage possible:
1. HOLY BLADE (Crusader, Nightstalker @ 40 trains)
2. Unholy, Holy, Lightning, Cold,
4. POISON BLADE (Assassin @ 40 trains)
1. Bleeding DoT
2. Poison DoT
A WORD OR TWO CONCERNING STRATEGY:
Of course all everyone wants to know is which one hits the hardest ? Well it's right there so now you know. Yes Burst damage is nice but There is a lot more to be understood though if you truly want to excel at this game. To begin with, you should absolutely know beyond any doubt precisely what your toons role is before you even make it! This can make a huge difference in which procs are best suited for you. In addition to that take a moment and consider your most likely opponents. On lore and fighting an oblivion charter ? use holy as opposed to unholy. Building a bane recon bow scout ? poison DoT suffix will make the opposing scouts scream in frustration. While a small group support scout might choose a Bleed Proc instead just to combat those assassins. Vampyre might be last on the list for actual direct damage delivered however is has the tactical advantage of healing you for each hit. and IMO that means you can safely double it's relative value and it can come in extremely handy on certain low HP builds. Also important to mention is that some of the Proc types have negative aspects such as the ability to be removed. The poison and bleed DoT procs can both be cured ! and the snare proc can be broken or dispelled just like any other snare. It's worthy to note that while I ranked them according to max damage here they are all balanced in that the MIN damages for those lower on the list are much higher meaning they all share about the same AVERAGE DPS regardless of spell. Another thing to note here is that the procs (just like their spell counter types) can carry other beneficial effects like Lightning has a micro stun component.
The last thing before I leave is a checklist of sorts about the most important things we have covered when building a proccing toon:
1. GREAT ATR Yes, it's number one on the list for a reason. If you can't hit your opponent you can't proc - PERIOD. Nothing else matters - not that you are attacking faster than anyone else, not that you have 500 INT and nuke for thousands, nothing matters unless you can reliably hit them.
2. ATTK SPEED: Surprised that this is number 2? you shouldn't be. if you read the paragraph about attk speed then you know that speed is king in the world of procs. It's more important that INT or SPI, power buffs etc because of it's massive influence regarding average proc damage. Compare two identical toons same weapon same everything, one has an attack speed of 5.0 the other 2.5 - the toon with the lower speed rating has TWICE the average Proc DPS ! and that's changing nothing but speed.
3. Stat layoutCON, INT and SPI are not to be ignored although they are 3 on the list. INT and SPI obviously boost damage numbers but consider that they increase heals (think mana pool here) and mana both of which give a proccer the endurance to last long enough for your procs to win . CON is also vital to consider because without lasting power in a fight your procs won't have time to kick in during a fight. Can you build a glass cannon elf that procs for 1500 a shot ? YES but my 4k hp human with 120 INT will beat him 90% of the time.
4. EVERY THING ELSE: Those other little things like exposes to damage type, power damage buffs etc are great if you can get them. If not you can still succeed as a proccer.
So this is finally the end to the wall of text. I plan to update this soon - particularly the missing info on the vamp proc but we are 99% there. I want to shout out special thanks to all who have helped my research and discuss Procs over the years.: Guildies past and present - DEVS past and present - and those of you who take the time to post thoughtful information on the forums. If you see a Human scout named" CRYFOUL" on track be sure to send a tell and let me know how you liked the guide. I'll arrange for a personal demo lol
PLAY TO CRUSH